i-tec USB 3.0 Charge HUB Our HUB offers ten USB 3.0 ports with Plug & Play and standard USB charging – it automatically detects whether a USB device is connected for charging. Since HUB is equipped with ten USB 3.0 ports, it can charge up to ten devices simultaneously. The USB 3.0 interface is particularly important when transferring data from USB 3.0 memory cards and flash drives, where its high transfer rate is most useful. The external power supply is included in the set to guarantee stable performance and charging from USB ports, providing up to 10 W charging power for each port. The individual HUB ports can be switched on and off with an appropriate switch, saving HUB energy consumption while increasing the charging power on the ports you leave on. This HUB does not require the installation of drivers. You simply connect it with a USB cable to your computer and you can start using it immediately. It has built-in overcurrent protection of the computer in case of short circuit in peripheral devices. The interface is compatible with USB 2.0 / 1.1. HUB is automatically detected and installed, does not require any drivers. Connect the power supply to HUBa and then to 230 V socket. Then connect HUB via USB cable to a free USB port ( USB 3.0, 2.0 or 1.1 standard) on your laptop/PC and follow the instructions displayed on the screen. The HUB will be installed and shown in the Device Manager as “General USB hub” and “General USB SuperSpeed hub”. Technical specifications 1x USB 3.0 port for connection to device 10x USB 3.0 port USB port charging power: up to 10W 1x power input (DC 12 V/4 A) On switch. / ON switch LED indicators USB 3.0 cable type A to type B (100 cm) Overvoltage and overcurrent protection OS: Windows XP / Vista / 7 / 8 / 8.1/10, macOS X, Linux, Chrome OS Product dimensions: 151 x 53 x 24 mm Product weight: 165 g Package dimensions: 173 x 116 x 60 mm Pack weight: 507 g